|
| |
|
|
|
|
|
Shop Charges
(charged in 1/4 hour increments)
| |
Shop time per hour |
$45.00 |
| |
Machine time per hour |
$55.00 |
| |
Minimum charge per gun |
$35.00 |
| |
Written estimate |
$20.00 |
Action
Blueprinting
| |
Standard: |
True receiver face and lap in bolt
lugs. |
| |
Level 2: |
True receiver face, lug seats,
remachine bolt lugs, true bolt head and face, lap in bolt. |
| |
Level 3: |
In addition to Level 2, recut
receiver threads concentric to bore. |
| |
Level 4: |
In addition to Level 3, bore
receiver boltway true to bore and fit oversize bolt body. |
| |
|
Remington 600, 700, XP100 and Model
7 as a standard for level 4, call for pricing on other
models |
| Bush bolt face or change
case head size, install Sako or M16 Extractor |
|
|
Added to any
blueprinting job |
(extractor
included) |
$175 |
|
|
Open bolt face
refit extractor |
(claw extractor
action) |
$125 |
Barrel Work
| |
Fit and chamber |
$175 |
| |
Rechamber (to
Ackley or Wylde) set barrel back and retime |
$125 |
| |
Complete barrel
break-in service (does not include ammo) |
$65 |
| |
Custom muzzle
breaks manufactured and fit |
$200 |
Glass
Bedding Services
| |
Standard glass
bedding |
$125 |
| |
Pillar bedding |
$165 |
| |
M1/M1A match
bedding |
$200 |
Stock Work
| |
We build complete custom stocks to
order. |
Please call for pricing. |
| |
Fit recoil pad |
|
| |
Wood stock |
$55 |
| |
Fiberglass stock (screw and epoxy
on) |
$65 |
| |
Inlet and fit barreled action to
stock |
starting at $125 |
| |
Install swivel studs (studs
included) |
$35 |
| |
Install Freeland or Anshutz forearm
rail (not including rail) |
$55 |
| |
Call for pricing on adjustable comb
and butt assembly |
|
Pistol
and Revolver Work
| This is just a
sample of the pistol and revolver work we do! |
| Reliability
Tune Up, 1911's |
Throat barrel,
polish feed ramp, tune extractor, lower and rake ejection
port. Replace recoil and firing pin spring, polish and
reblue slide. Test fire. |
$200 |
| |
Low mount
Bo-Mar sight "protected" either dovetailed or silver
soldered front sight. Polish and reblue slide (sights
included). Test fire. |
$300 |
| |
Fit beavertail
safety (safety not included) |
$80 |
|
Fit ambi thumb safety (safety not included)
starting at |
$65 |
| |
Action job, 1911 type |
$95 |
| |
Action job, Browning Hi Power |
$120 |
| |
"Solder On" type mag well extension
starting at |
$125 |
| |
Fit new Commander Hammer (parts and trigger work not
included). Requires test fire. |
$30 |
Revolver Work
| |
Action job,
Single action |
$65 |
| |
Action job,
Double action |
$110 |
| |
Set barrel
back, recut forcing cone and cylinder gap |
$95 |
| |
Convert square
butt to round butt |
$100 |
| |
Straighten
crane |
$35 |
| |
"Bob" hammer
spur |
$40 |
Trigger Work
|
Bolt Actions |
|
| |
Adjust trigger |
$55 |
| |
Stone and set trigger |
$75 |
| |
Fit Jewel or similar trigger (does not include trigger or
stock work) |
$65 |
| |
Semi-auto |
|
| |
AR-15 and FN FALs |
$95 |
Sight Work
| |
Custom sight
mount |
$55/hr |
| |
Drill/tap and
mount sights -2 holes |
$30 |
| |
Drill/tap and
mount scope -4 holes |
$50 |
| |
Turn barrel for
front sight clamp |
|
| |
when fitting a
barrel |
$25 |
| |
on an already
fitted barrel |
$65 |
| |
Drill barrel
for Unertle bases (does not include bases) |
$50 |
| |
Custom scope
mount, custom base, ream and lap in rings mount and
boresight |
$65 |
| |
Cut a dovetail
in barrel |
$55 |
| |
Sweat on front
sight |
$50 |
| |
Bore sight
customer gun |
$20 |
| |
Sight in
customer gun (does not include ammo or targets) |
$50 |
Shotgun Work
| |
Cut long
forcing cone |
|
|
| |
|
(non chromed
barrels) |
$55 |
| |
Modify choke |
|
|
| |
|
(non chromed
barrels) |
$55 |
| |
Install beads |
|
|
| |
|
(per bead, not
included) |
$25 |
| |
Safety check
and test fire |
|
$35 |
Clean and Oil
| |
Rifle |
$55 |
| |
Handgun |
$45 |
| |
Shotgun
starting at |
$75 |
| |
Antique/Excessively Dirty |
$75 |
|
|